Atex approved Float Level Transmitter : Over All Length: 300mm to 5000mm Input: 16V DC to 30V DC Output: 4-20mA / 0-10V DC Resolution: 5mm / 10mm Enclosure: Cast Aluminium, IP66 Wetted parts: SS 304 / SS 316 / SS 316L / Titanium Mounting: Flange / Thread / Tri clover Accracy: +/- 0.5% FS Approval: EX II 1G Ex ia IIB T4 Ga EX II 2G Ex db IIB T4 Gb

Ultrasonic Level Sensor is a non-contact ultrasonic continuous level measurement product based on sound technology. Ultrasonic Level sensors offers an affordable solution for a variety of applications for Water, wastewater, petrochemical, chemical, food, and beverage. We offer Ultrasonic Level Transmitter at a pocket-friendly price. Specification: Our entry level cost effective product Fast setup, configuration, and commissioning Maximum range of 20mts 4-20mA output LCD display False echo tracing Direct installation of tanks, vessels, and reactors Perfect for diesel oil tank measurements Extended range of 0.25 to 15 meter (0.8ft to 49ft) Integral LCD display, keypad and integral 4-20 mA output Automatic compensation for different environment Approved for installations in hazardous areas (Ex) Simple to install and configure Direct installation of tanks, vessels, and reactors

Radar Level Transmitter FILPRO offers professional Radar Level Transmitter. ​ Our radar level transmitter uses radar to continuously measure non-contact liquid level, the sensor sends microwave signals to the medium from above. ​ The surface of the medium reflects the signal back to the sensor. ​ The radar sensor uses the received microwave signal to determine the distance to the product surface and calculate the height from it. ​ Radar level transducer is an excellent substitute for differential pressure instruments, magnetostrictive, radio frequency admittance, and Ultrasonic level transmitter. ​ The radar level transmitter is not affected by vacuum, dust, temperature, pressure changes, steam and falling gases. ​ An ISO 9001:2008 Company ​ FRLT-80S ​ Application: Liquid Measurement ​ Measuring Range: 0~10m ​ Antenna Type: Lens/PTFE ​ Mounting Thread: Thread G1.5 Beam Angle: 8° ​ Response Time: <0.6s (Due To Parameter Setting) ​ Medium Temperature: (-40 ~ 120) °C ​ DK Value Of Medium: 1.5 ​ Process Pressure: (-0.1 -0.3) MPa ​ Accuracy: <2mm ​ Signal Output: (4-20) mA HART ​ Working Frequency: (76 -81) GHz ​ Explosion Proof Grade: Ex d[iaGa] IIC T6 Gb ​ Instrument Type Standard Explosion-Proof ​ Housing/Protection Grade ​ Aluminum Alloy/IP68 ​ Aluminum Alloy Dual Chamber/IP67 ​ Special Terms ​ Antenna Type ​ Lens/PTFE G1.5 ​ Anti-Corrosive ​ Process Connection Thread G1.5 ​ Special Terms ​ Electronic Unit ​ 2 Wires (4 ~ 20) mA 24VDC/HART ​ 4 Wires (4-20) mA 220V AC ​ Special terms ​ Cable Inlet ​ M20*1.5 NPT1/2 Material Type ​ Liquid Special Terms ​ FRLT-63 ​ Application: Solid Particles, Solid Powder, All kinds Of Dust Environment ​ Measuring Range: 0-70m ​ Connection Process: Flange ​ Medium Temperature: (-40-350)°C ​ Process Pressure: (-0.1-2) MPa Directional ​ Accuracy: ±15mm Signal Output: (4-20)mA HART/RS485 MODBUS ​ Explosion-Proof Grade: Ex ia IIC T1-T6 Ga/Ex d IIC T6 Gb ​ Protection Grade: IP68 ​ Frequency Range: 26GHz ​ Instrument Type ​ Standard Flameproof Intrinsically Safe Explosion-Proof Type ​ Housing/Protection Grade ​ Die-Casting Aluminium With Epoxy Coating/IP68 ​ Die-Casting Aluminium With Epoxy Coating Dual Chamber/IP67 ​ Material ​ Stainless Steel 316L ​ Special Custom ​ Sensor Type ​ Directional Purge Type ​ Universal Purge Type ​ Process Connection 1½" NPT Thread (Directional) Flange DN80 ​ Flange DN100 ​ Flange DN200 ​ Special Custom ​ Antenna Type ​ Horn Antenna Ø98 ​ Horn Antenna Ø96 Longer ​ Special Custom ​ Seal/Process Temperature ​ Viton/(-40 -150)°C ​ Kalre/(-40 -350)°C (With Heat Sink) ​ Electronic Unit ​ (4 -20)mA 24V DC/HART Two-Wire ​ (4 -20)mA 220V AC/Four-Wire Dual Chamber Housing ​ RS485 MODBUS-RTU Communication Protocol/Four-Wire ​ Special Custom ​ Cable Inlet ​ M20*1.5 NPT 1/2 ​ Scene Display/Programmed ​ LCD Without Backlight ​ LCD With Backlight Range ​ (0-5)m ​ (0-10)m ​ (0 -20)m ​ (0 -30)m ​ (0 -70)m ​ Special Custom ​ FRLT-81S ​ Application: Liquid Measurement ​ Measuring Range: 0-10m ​ Antenna Type: Lens/PTFE ​ Mounting Thread: Thread G3.5 ​ Beam Angle: 3° ​ Response Time: <0.6s (Due To Parameter Setting) ​ Medium Temperature: (-40-120)°C ​ DK Value Of Medium: 1.5 ​ Process Pressure: (-0.1-2) MPa ​ Accuracy: <2mm ​ Signal Output: (4-20)mA HART ​ Working Frequency: (76 -81) GHz ​ Explosion Proof Grade: Ex d[ia Ga] IIC T6 Gb ​ Instrument Type Standard Explosion Proof ​ Housing/Protection Grade ​ Aluminum Alloy/IP68 ​ Aluminum Alloy Dual Chamber/IP67 ​ Special Terms ​ Antenna Type ​ G3.5 Lens/PTFE ​ Anti-Corrosive ​ Process Connection Thread G3.5 ​ Flange DN80 PN10 ​ Flange DN80 PN10 Universal Type ​ Flange DN100 PN10 ​ Flange DN100 PN10 Universal Type ​ Special Terms ​ Electronic Unit ​ 2 Wires (4-20) mA 24VDC/HART ​ 4 Wires (4 -20) mA 220V AC ​ Special terms ​ Cable Inlet ​ NPT1/2 M20*1.5 Material Type ​ Solid Special Terms ​

Hydrostatic liquid level transducers and transmitters with flush diaphragm is designed fora wide variety of level measurement applications. This pressure sensor is protected by the stainless steel (SS) housing. Featuring the flush diaphragm makes it suitable to measure viscous media or media with small particles, so as to have diverse measurement applications. The standard reference pressure is gauge (or relative) pressure realized through a vent tube in the cable. The reference pressure can also be absolute pressure on request. We offer wide measuring range from 0~1 to 0~200 meter water column (mH2O) with measuring accuracy of 0.5%fs. Output signal is current loop (4~20mA,standard) Features : Measuring Ranges: 1M, 2M, 3M, 5M, 6M, 8M, 10M, 12M 15M, Higher Length On Request Output Signal: 4-20mA Accuracy: 0.5%Fs Compensated Temperature Range: 0~70Deg C Construction: All Stainless Steel Housing, Rigid And Robust Environment Protection: Ip68

Float Level Transmitter Float Level Transmitters Are Ideal For Continuous Level Monitoring In Water, Diesel, Chemical And Oils For Accurate Level Measurement. The Output Is Not Affected By Liquid Type, Temperature, Pressure And Other Physical Parameters. The Transmitter Is Factory Calibrated And Is Ready To Use. Construction: Float Level Transmitter Consists Of Non Magnetic Sealed Stem Containing Series Of Reed Switches And Resistor, Float Carrying Magnet, Mounting Adaptor (Or Flange) And Enclosure Containing Electronics. Consider Our Float Level Transmitters For All Your Continuous Liquid level Monitoring Needs Like Water, Diesel, Lube Oils, Fuels, Chemicals And Petrochemical Liquids. Here Are Just Few Areas Where Transmitter Can Be Used. Utilities, Beverage Industry, Medical, Pharmaceuticals, Food Processing, Breweries, Chemical, Petrochemical, Refinery Specification: Overall Length: 300 mm to 5000mm Measuring Error: ±0.25 % or Span Output Temperature Coefficient: ±0.007% / oC Resolution: 5mm / 10mm Ambient Temperature: -40oC to 60oC Liquid Temp. Range: -40oC to 120oC Liquid Min. Density: 0.8 gm/cc Max. Pressure: 10 kg/cm2 Protection category: Weatherproof Ip66 to IS: 2147 (or) Flame Proof Gr. IIA & IIB to IS: 2148 Terminals: Max. 1.5mm2 Flexible Cable Entry: PG11 for weather Proof ¾" Et for Flameproof (Glands not supplied) Current Output: 2 wire, 4... 20 A 3 wire, 0-10 Vdc Process Connection: Threaded Flanged Tri-clamp Others Excitation Voltage: 10-36 V DC Loop Resistance: Max. 1200 Ohms

Ligo fuel sensor for monitoring Diesel and Petrol level in vehicle fuel tanks and DG sets. Highly accurate upto 99.5% Available in length : 700mm, 1000mm and 1500mm upto 6000mm Input: 9-37V DC Output: 0-5V DC, 0-10V DC, RS 485, RS 232 Resolution: 12 bit

Stainless steel Miniature Level Switch is a compact construction, suitable for mounting vertically. SS Miniature Level Switch consists of a Reed Switch housed inside the guide tube & a permanent magnet inside the Float assembly. The Float moving with the liquid level makes (NC) & breaks (NO) the Reed Switch contact. Miniature Level Switch is used for sensing low, high or both high & low level in tanks. Applications: Water Diesel Hydraulic Oil Edible Oil Chemicals & Pharma

Tubular Glass Level Indicator is used for visual level indication of liquid in storage and process tanks. Our company is among the most sought after offering Tubular Glass Level Indicator to the clients. Tubular Glass Level Indicator is designed by high skilled professionals using optimum quality components and modern technology at the well-developed manufacturing unit. Offered range is checked stringently on certain quality stages before final delivery. Features: Long lasting Robust construction Efficiency Specifications : Indicator length: 300 mm to 3000mm Max. Temperature: 200 Deg C Max. Pressure: 15 kg/sq cm Mounting flange: 1" ANSI Isolation valve: Available Indicating tube: 19mm Borosilicate glass tube Allication: Water, Diesel, Chemical, Oil, Edible Oil, Acid, Alkali, Solvents MOC: MS, SS 304, SS 316, PP

Filpro offers most reliable, cost effective Side Mounted Level Switch for point level sensing. It is used to control the liquid level in vessels / storage tanks / machines containing corrosive or noncorrosive liquids. It is used to control pump, provide Alarm, for valve control or level indication. Features: Easy to install Reliable Available with different flange size Available in different MOC Principle: The float lever carries a permanent magnet which is repelled by a similar magnet mounted in the switch housing. The magnet having the same pole directed towards each other are separated by a nonmagnetic diaphragm. The glandless construction offers excellent sealing. Construction: It consists of 3 main parts: Housing with Micro Switch Mounting Flange Float Assembly Applications: Water, Diesel, Kerosene, Furnace oil, Edible Oil, Fuels, Chemical, Solvents, Syrup, Acid, Alkali, Solvents, Petrochemical