Products

Hydrostatic liquid level transducers and transmitters with flush diaphragm is designed fora wide variety of level measurement applications. This pressure sensor is protected by the stainless steel (SS) housing. Featuring the flush diaphragm makes it suitable to measure viscous media or media with small particles, so as to have diverse measurement applications. The standard reference pressure is gauge (or relative) pressure realized through a vent tube in the cable. The reference pressure can also be absolute pressure on request. We offer wide measuring range from 0~1 to 0~200 meter water column (mH2O) with measuring accuracy of 0.5%fs. Output signal is current loop (4~20mA,standard) Features : Measuring Ranges: 1M, 2M, 3M, 5M, 6M, 8M, 10M, 12M 15M, Higher Length On Request Output Signal: 4-20mA Accuracy: 0.5%Fs Compensated Temperature Range: 0~70Deg C Construction: All Stainless Steel Housing, Rigid And Robust Environment Protection: Ip68

The Magnetic Level Switch consists of the non-abrasive float carrying permanent magnet and non-ferrous stem carrying one. Two or multiple reed switches. The float glides along the stem and when the float nears the vicinity of reed switch the magnetic field of permanent magnet forces the contact to close, thereby completing the external electrical circuit. We offer Magnetic Level Switch at a reasonable price. Applications: Due to simple design, reliability and with only one moving part i.e., Magnetic float, Magnetic Level Switch finds application in various liquids were accurate and repeated liquid level control is called for. Magnetic Level Switch is suitable for storage tanks, utility tanks, process tanks, hydraulic power pack, centralized lubrication system, fuel tanks, cooling tower, textile, pharmaceuticals and special purpose machines. Technical specifications: Type of float: 34 x 36 Pu foam, 40 SS 316, Float, 52 SS 316, 68 SS 316 Temperature 0Deg C to + 80Deg C / -25Deg C to + 125Deg C Pressure Max. Atmospheric 20 kg/cm2 Stem: SS 304, SS 316, PP, PTFE, Titanium Flange Size: Any table flange and size Max. Length 3000mm Accuracy +2mm Set point 1 to 10

Ultrasonic Level Sensor is a non-contact ultrasonic continuous level measurement product based on sound technology. Ultrasonic Level sensors offers an affordable solution for a variety of applications for Water, wastewater, petrochemical, chemical, food, and beverage. We offer Ultrasonic Level Transmitter at a pocket-friendly price. Specification: Our entry level cost effective product Fast setup, configuration, and commissioning Maximum range of 20mts 4-20mA output LCD display False echo tracing Direct installation of tanks, vessels, and reactors Perfect for diesel oil tank measurements Extended range of 0.25 to 15 meter (0.8ft to 49ft) Integral LCD display, keypad and integral 4-20 mA output Automatic compensation for different environment Approved for installations in hazardous areas (Ex) Simple to install and configure Direct installation of tanks, vessels, and reactors

Float Level Transmitter Float Level Transmitters Are Ideal For Continuous Level Monitoring In Water, Diesel, Chemical And Oils For Accurate Level Measurement. The Output Is Not Affected By Liquid Type, Temperature, Pressure And Other Physical Parameters. The Transmitter Is Factory Calibrated And Is Ready To Use. Construction: Float Level Transmitter Consists Of Non Magnetic Sealed Stem Containing Series Of Reed Switches And Resistor, Float Carrying Magnet, Mounting Adaptor (Or Flange) And Enclosure Containing Electronics. Consider Our Float Level Transmitters For All Your Continuous Liquid level Monitoring Needs Like Water, Diesel, Lube Oils, Fuels, Chemicals And Petrochemical Liquids. Here Are Just Few Areas Where Transmitter Can Be Used. Utilities, Beverage Industry, Medical, Pharmaceuticals, Food Processing, Breweries, Chemical, Petrochemical, Refinery Specification: Overall Length: 300 mm to 5000mm Measuring Error: ±0.25 % or Span Output Temperature Coefficient: ±0.007% / oC Resolution: 5mm / 10mm Ambient Temperature: -40oC to 60oC Liquid Temp. Range: -40oC to 120oC Liquid Min. Density: 0.8 gm/cc Max. Pressure: 10 kg/cm2 Protection category: Weatherproof Ip66 to IS: 2147 (or) Flame Proof Gr. IIA & IIB to IS: 2148 Terminals: Max. 1.5mm2 Flexible Cable Entry: PG11 for weather Proof ¾" Et for Flameproof (Glands not supplied) Current Output: 2 wire, 4... 20 A 3 wire, 0-10 Vdc Process Connection: Threaded Flanged Tri-clamp Others Excitation Voltage: 10-36 V DC Loop Resistance: Max. 1200 Ohms

FILPRO offers Magnetic Level Indicator provides clear, high clarity indication of liquid level. Typically, Magnetic Level Indicator consists of three major components: Float Chamber, Float and Indicator System. Magnetic Level Indicator is principally designed as an alternative to glass level gauges. We offer Magnetic Level Indicator having top-bottom, top and side mounted construction with two types of indicator system i.e. Capsule and Bi-colour Rollers. Magnetic level indicators are tailor made to various types of construction and sizes. Working Of Magnetic Level Indicator: Magnetic Level Indicator operates on the principle of magnetic field coupling to provide fluid level information. Float chamber is typically constructed with a non-magnetic pipe having process connections that match to the vessel connections. Float size and weight are determined by the process fluid, pressure, temperature and the specific gravity of the process fluid. Float contains magnets to provide 360o magnetic flux field. Specifications: Type: Magnetic Level Gauge Mounting Orientation: Top Mounted, Side Mounted & Top – Bottom Indicator System: Bi-colour Rotating Roller / Capsule Housing for Indicator: For Bi-colour Roller – RAIL in Aluminium or SS Housing System For Capsule – Heavy Walled Glass Tube in Aluminium / SS Housing MOC of Indicator: ABS Plastic / SS Float Chamber: Non-Magnetic Standard pipe MOC of Float Chamber: SS 304, SS 316, SS 316L, PP, PVDF, Others on request Float: SS 304, SS 316, SS 316L, PP, PVDF, Others on request Scale: Aluminium / SS / Acrylic engraved in mm Process Connection: Flanged in various sizes Vent: 1⁄2” Plugged / 1⁄2” Needle Valve / 1⁄2” Ball Valve Drain: 1⁄2” Plugged / 1⁄2” Needle Valve / 1⁄2” Ball Valve Limit Switch Assembly: Snap Acting 1 SPDT Micro switch, 5A, 230 VAC or 24 VDC X 0.7A Reed Switch Switch Housing: Aluminium Die Cast Weatherproof to IP – 65 Aluminium Die Cast Explosion proof suitable for Group IIA, IIB Aluminium Die Cast Explosion proof suitable for Group IIC Electrical Cable Entry: 3⁄4” ET (F) Centre to Centre Distance: Bi-colour Rollers – up to 6000 mm, Capsule – up to 6000 mm Max. Operating Pressure: 15 Kg/cm2 (others on request) Performance: Reliable for aggressive, combustible, toxic, high pressure and high temperature (up to 150°C) liquid storage tanks. Side mounted magnetic level indicator most reliable and safe for a hazardous application like LPG, Oleum, Chlorosulfuric Acid, HNO2, and Solvents like benzene, Toluene alcohols. Useful for Acid, Alkali, Solvent, Oils, Vegetable Oil.