Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108045133624 (International callers) or 08045133624 (Indian callers).
Capacitance Level Transmitter can be used for conductive as well as non conductive liquids. It is offered with PTFE sleeve for better insulation & to withstand high temperature in conductive tanks the insulated probe acts as one electrode & the tank wall as another electrode, any change in liquid level the dielectric value will change thereby changing the capacitance value proportional to the liquid level. In the case of nonconductive tanks, a reference probe is provided as a ground electrode.
Output is 4-20mA, 4 wire connections for isolated supply & 3 wires for non isolated supply. 2 wire loop powered output is also available.
Tank empty (4mA) & Full (20mA) calibration is through easy field calibration button.
Rigid probe is offered for tank depth up to 3 mt & Flexible probe up to 15mtr.
Capacitance Level Transmitter is available with a different mounting arrangement to suit customer requirement.
It is widely used for water, diesel, oil and chemical application.
Highlights :
Excellent Design
Used For Sensing Level Of Liquids
Longer Service Life
Specification:
Type: 2 Wire (Loop powered), 3 wire (Non isolated), 4 wire (Isolated) 4-20 mA
Input: 24V Dc
Permissible Load: 500Ω
Measuring Rage: 200 mm to 3000 mm in Rigid Probe Upto 15000 mm in Flexile Probe
Pressure Max.: 5kg / cm 2
Temperature: -25 to 100Deg C
Enclosure: Die Cast aluminium, Weatherproof or Flameproof
Resolution: 5mm
Accuracy: +0.5 % Fs
Mounting: Threaded -½" / 1" / 2" bspm or Npt Flange - 1" /2" Asa/Ansi/Jis/din
Mounting: SS 304 or SS 316
Filpro Sensors Pvt Ltd manufactures industrial Level Controller (Smart On) to automatically start & stop the pump.
For this tank has to be fitted with our Magnetic Float Switch or Cable Float Switch.
Liquid Level Controller (Smart On) provides LED Indication for Power ON, Relay ON (Motor ON), Tank High & Tank Low.
The controller has provision to select pump mode as Pump UP or Pump Down. In Pump UP mode, the pump starts at Low Level & Stops at High Level. Pump UP mode is used to fill the tank. In Pump DOWN mode, the pump starts at High Level & Stops at Low Level. Pump DOWN mode is used to empty the tank.
Specifications:
Input Supply: 230V AC
Sensor Input: From Magnetic Float Switch or Cable Float Switch
Output: 1NO contact rated for 230V AC, 5A
Mounting: Back panel 35mm din rail mounting
Mode: Pump UP ( Filling ) or PUMP Down ( Emptying)
Atex approved Float Level Transmitter :
Over All Length: 300mm to 5000mm
Input: 16V DC to 30V DC
Output: 4-20mA / 0-10V DC
Resolution: 5mm / 10mm
Enclosure: Cast Aluminium, IP66
Wetted parts: SS 304 / SS 316 / SS 316L / Titanium
Mounting: Flange / Thread / Tri clover
Accracy: +/- 0.5% FS
Approval: EX II 1G Ex ia IIB T4 Ga
EX II 2G Ex db IIB T4 Gb
Ligo fuel sensor for monitoring Diesel and Petrol level in vehicle fuel tanks and DG sets.
Highly accurate upto 99.5%
Available in length : 700mm, 1000mm and 1500mm upto 6000mm
Input: 9-37V DC
Output: 0-5V DC, 0-10V DC, RS 485, RS 232
Resolution: 12 bit
